|
Post by glenshelley on Jan 12, 2019 16:16:32 GMT
Hi all I have just plugged my guitar into a zoom 508 delay using a Roland cube practice amp and there is only a slight delay and the delay does not change any ideas friends Can you use the 508 pedal with this amp Kind regards all Glen
|
|
|
Post by Stu's Dad on Jan 12, 2019 16:20:31 GMT
The Zoom should work with any amp. Do you have any settings programmed on it?
Len
|
|
|
Post by sixchannel on Jan 12, 2019 16:38:21 GMT
AFAIK the 508 didnt come programmed with Shads echoes. But you can do it yourself. Go to www.goran.tangring.com and you'll see 508 parameters to input for many many tunes. Back in the day when the 508 was all we had, it did the job very well. Store them on board. HTH Ian
|
|
|
Post by glenshelley on Jan 12, 2019 16:38:37 GMT
Hi Len Thanks for your reply The amp is set at clean setting the tone about half way the zoom is set at A1 for Apache Cheers Glen
|
|
|
Post by glenshelley on Jan 12, 2019 16:42:41 GMT
Thanks Ian Yes I have programmed the unit from Charlie’s patches Cheers glen
|
|
|
Post by Stu's Dad on Jan 12, 2019 18:10:13 GMT
I think you're missing one action when you programme the patches in Glen. Are you sure you're saving them?
Len
|
|
|
Post by glenshelley on Jan 12, 2019 19:37:38 GMT
Hi Len Ah I will check each programme to the list and try again You can slightly here the tap echo but nothing like it was Before
Thanks len
|
|