fab1
Member
Posts: 9
|
Post by fab1 on Oct 17, 2016 23:47:58 GMT
Hi all, i'm after a new power pack for a H and C unit in New Zealand. I have come a cross a 230 volt 12v Ac 1000ma pack which is great. The tip is 2.1 X 5.5mm. This plugpack has a reversible tip so you can choose the polarity to suit your requirements. Would this tip fit the H and C?
Cheers, Craig
|
|
|
Post by Charlie Hall on Oct 18, 2016 14:01:22 GMT
Hi Craig, Yes, that is the exact correct size tip and the other specs are correct too. Being AC, you don't have to worry about polarity. Regards, Charlie
|
|
fab1
Member
Posts: 9
|
Post by fab1 on Oct 18, 2016 16:07:03 GMT
Thanks Charlie, much appreciated.
|
|
|
Post by sheendigs on Jan 24, 2020 0:56:13 GMT
In theory, The Magicstomp Yamaha power pack, should do the job?? Input: 120V-60Hz-25W Output: 12VAC 1000mA ?
|
|
|
Post by Hendrickx on Jan 21, 2022 17:58:49 GMT
|
|
|
Post by Charlie Hall on Jan 22, 2022 18:33:52 GMT
I couldn't find anything in the spec about current. I think it might work, as long as it can provide enough current. Regards, Charlie
|
|
|
Post by Hendrickx on Jan 22, 2022 20:15:50 GMT
|
|
|
Post by Charlie Hall on Jan 24, 2022 17:53:03 GMT
Yes, then it should work OK. Regards, Charlie
|
|
|
Post by derekdelboy on Jun 2, 2022 14:03:53 GMT
Check this one out ... especially 90 degree output plug !!
Only one left !!
Make sure its AC output.... I did not read it correctly.
|
|
|
Post by Hendrickx on Jun 2, 2022 14:19:03 GMT
I think this is DC output …… Don’t kill this H&C , they are hard to find 😉
|
|