Post by ovopereira on Jul 9, 2021 9:22:10 GMT
I need help to set Predelay on Zoom G3 for reverb to 100ms. Especially for the arena reverb module.
What are the advisable Predelay settings and level for Apache if I use the Room reverb. Also some advice on reverb for other shadows songs would mean a lot to me.
The G2.1nu also has similar reverb but does not have predelay parameter.
The Zoom G3 manual as below mentions PreD 1–100 but does not mention in ms milliseconds hence I'm confused. Please help.
090 Hall This reverb effect simulates the acoustics of a concert hall. FS InputMute
Knob1 Knob2 Knob3
Page01
Decay 1–30 Tone 0–10 Mix 0–100 P
Sets the duration of the reverberations. Adjusts the tone. Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
PreD 1–100 Level 0–150
Adjusts the delay between input of the
original sound and start of the reverb sound. Adjusts the output level.
091 Room This reverb effect simulates the acoustics of a room. FS InputMute
Knob1 Knob2 Knob3
Page01
Decay 1–30 Tone 0–10 Mix 0–100 P
Sets the duration of the reverberations. Adjusts the tone. Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
PreD 1–100 Level 0–150
Adjusts the delay between input of the
original sound and start of the reverb sound. Adjusts the output level.
093 Spring This reverb effect simulates a spring reverb. FS InputMute
Knob1 Knob2 Knob3
Page01
Decay 1–30 Tone 0–10 Mix 0–100 P
Sets the duration of the reverberations. Adjusts the tone. Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
PreD 1–100 Level 0–150
Adjusts the delay between input of the
original sound and start of the reverb sound. Adjusts the output level.
094 Arena This reverb effect simulates the acoustics of a large enclosure
such as a sports arena. FS InputMute
Knob1 Knob2 Knob3
Page01
Decay 1–30 Tone 0–10 Mix 0–100 P
Sets the duration of the reverberations. Adjusts the tone. Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
PreD 1–100 Level 0–150
Adjusts the delay between input of the
original sound and start of the reverb sound. Adjusts the output level.
What are the advisable Predelay settings and level for Apache if I use the Room reverb. Also some advice on reverb for other shadows songs would mean a lot to me.
The G2.1nu also has similar reverb but does not have predelay parameter.
The Zoom G3 manual as below mentions PreD 1–100 but does not mention in ms milliseconds hence I'm confused. Please help.
090 Hall This reverb effect simulates the acoustics of a concert hall. FS InputMute
Knob1 Knob2 Knob3
Page01
Decay 1–30 Tone 0–10 Mix 0–100 P
Sets the duration of the reverberations. Adjusts the tone. Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
PreD 1–100 Level 0–150
Adjusts the delay between input of the
original sound and start of the reverb sound. Adjusts the output level.
091 Room This reverb effect simulates the acoustics of a room. FS InputMute
Knob1 Knob2 Knob3
Page01
Decay 1–30 Tone 0–10 Mix 0–100 P
Sets the duration of the reverberations. Adjusts the tone. Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
PreD 1–100 Level 0–150
Adjusts the delay between input of the
original sound and start of the reverb sound. Adjusts the output level.
093 Spring This reverb effect simulates a spring reverb. FS InputMute
Knob1 Knob2 Knob3
Page01
Decay 1–30 Tone 0–10 Mix 0–100 P
Sets the duration of the reverberations. Adjusts the tone. Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
PreD 1–100 Level 0–150
Adjusts the delay between input of the
original sound and start of the reverb sound. Adjusts the output level.
094 Arena This reverb effect simulates the acoustics of a large enclosure
such as a sports arena. FS InputMute
Knob1 Knob2 Knob3
Page01
Decay 1–30 Tone 0–10 Mix 0–100 P
Sets the duration of the reverberations. Adjusts the tone. Adjusts the amount of effected sound
that is mixed with the original sound.
Page02
PreD 1–100 Level 0–150
Adjusts the delay between input of the
original sound and start of the reverb sound. Adjusts the output level.