alesis quad plus.Advance pedal

[ray6652]

Hi, can anyone tell me why the quadraverb can only go up
its channels and not down.
Is there any reason for this please.As i cant understand why they would only go up.
Another question,I believe there are two banks on the quad 0 and 1
can both be used,If so how.I do have charlies eftp on it and dont want to loose this.
Any suggestions would be very helpfull.
many thanks .
ray

[grip]

Hi Ray,

There is only 1 bank of effects on the quadraverb, and I'm not really sure what you mean by "they would only go up", do you mean that you cannot switch, say, from patch 09 to 08, but can switch between 08 and 09? I have no problems changing patches in either direction using the "value" buttons on the front of the unit.

Kind regards,


Chris

[ray6652]

thanks for your reply,What i meant was when you plug the remote
foot switch in the back it will only go up in value say 1 2 3 4
but it wont go 4 3 2 1 .is this normal
many thanks
ray

[grip]

Hi Ray,

I only use the front panel and I was unaware of a rear footswitch option - I thought a MIDI controller was the only way to change patches away from the box. As a player who hasn't done gigs for many a year, changing patches quickly is not critical for me.

Kind regards,


Chris

[fenderplucker]

Hi Ray,
the advance footswitch on the Quad + will only advance (i.e. increase) the patch number. However, the range over which the advance occurs can be set by the Footswitch Range page accessed by the the MIDI then PAGE buttons.

Hope that helps,
Paul.

[ray6652]

Thank you all for getting back to me.The information was very helpful
and now understand it all a lot more than i did.

As i didnt want to loose the eftp patches.I think i best leave it alone.

many thanks again to all you great guys for helping me.

ray

[Charlie Hall]

I think you might find if you set the range backwards, eg 66 to 45, then the programs selected by the advance footswitch will instead go backwards.