|
Post by Deleted on Apr 3, 2021 8:27:47 GMT
Hi All, i have 2 - 10" powered speakers that i play my backing tracks through via an iPad & mixer , would it be better to mic the vox vt 20+ up through the powered speakers as well
any thoughts appreciated regards Phil
|
|
|
Post by timryland on Apr 3, 2021 19:31:10 GMT
Phil,
When I had a similar set-up I used the line out from my VT20+ into one of the channels on my mixer. I tried micing it up, but wasn’t convinced it was any better.
Tim.
|
|
|
Post by Deleted on Apr 3, 2021 20:11:29 GMT
Thanks Tim i have used the headphone out of the amp into the mixer and used the headphones at night but ill try it both ways through the powered speakers regards phil
|
|
|
Post by timryland on Apr 4, 2021 11:36:53 GMT
Phil,
To be honest, I now use the following set-up. Backing Tracks are played on a really old XP laptop using a program I wrote. The O/P from this laptop goes into the AUX IN on my VT20+. My Strat goes through a BOSS volume pedal then a Zoom G1Four then into the VT20+. I then use a splitter out of the Headphones/Line Out, one going to my headphones, the other through an iRig HD2 into my iPad for recording.
I’ve found this is the simplest, least complicated set-up I’ve found that suits me. 90% of the time I play through my headphones. I’m only in a small room, but I have swapped the headphones for some speakers before now and they worked fine, I just prefer headphones now.
Tim.
|
|