|
Post by timryland on Oct 21, 2009 7:30:44 GMT
Charlie,
I currently use a Zoom 508 (EFTP) into a V-Amp2. I have been thinking about getting a Zoom G2.1 to replace the 508/VAmp combination. This is mainly because I feel the 508 feels a bit flimsy when changing patches, also it will save having the 508 and a separate volume pedal on my pedalboard. I use a Zoom A2 for my acoustic work and have been quite pleased with it.
However, on a visit to my local 2nd hand store, they had a Zoom RFX-2000 for sale at £35. Would it be worth going for this in your opinion, or would I be better sticking with my original intention of getting a Zoom G2.1.
Many Thanks,
Tim Ryland.
|
|
|
Post by didier on Oct 21, 2009 7:57:41 GMT
Here is how Charlie himself rates his own patches :
This is the full current list, in order of my personal preference (my least favourites are at the top of the list). Others may disagree! The price of my programs is also shown.
Zoom 508 Free Zoom RFX-2000 £40 Zoom RFX-2200 £40 Alesis Quadraverb Plus £50 Alesis Quad GT £50 Zoom G2 £15 Zoom G2.1u £15 Zoom G7.1ut £45 Zoom G9.2tt £45 Yamaha Magicstomp £25 Alesis Q2 £135 Alesis Q20 £135
You can now draw a conclusion by yourself !
Didier
|
|
colljaw
Member
The Controller
Posts: 426
|
Post by colljaw on Oct 21, 2009 9:51:49 GMT
Hi Tim, if you can get an rfx 2000 for £35, then go and buy it as it is a bargain. Then buy Charlie's patches for £40.
Regards, Jim
|
|
|
Post by didier on Oct 21, 2009 10:24:09 GMT
You can also find a second hand Zoom G2 for around £ 50 and buy Charlie's patches for £ 15...
Didier
|
|
|
Post by BarryH on Oct 21, 2009 11:14:12 GMT
Hi Tim,
At £35 for the RFX2000 you should really go into the shop wearing a mask and carrying a bag marked SWAG.
Quite a fair piece of kit as well when EFTP is programmed in.
Cheers Barry
|
|
|
Post by Charlie Hall on Oct 21, 2009 13:35:12 GMT
Hi Tim, At that sort of price it is difficult to say no. However, it needs to be checked to make sure it is working as it would surely cost more than that to fix it if anything is wrong with it. One piece of information that may help you to make up your mind, the inputs of the RFX-2000 are really too low for direct connection from a guitar (even through a passive volume pedal ie, one that doesn't run on batteries) so some highs will be lost. This problem is best cured by using an active device such as an effects pedal with the effect switched off (except when that effect is required) between the guitar and the RFX-2000. Regards, Charlie
|
|
|
Post by timryland on Oct 23, 2009 11:20:15 GMT
Charlie,
Thanks for the reply. Ihave now bought the unit and tested it and everything seems fine. I have e-mailed you regarding getting the EFTP patches.
Is it possible to program these in manually, or do I need to get the USB/MIDI connector?
Thanks,
TIm.
|
|
|
Post by Charlie Hall on Oct 23, 2009 14:40:21 GMT
Hi Tim, I hadn't received your email when I looked a few minutes ago. I have to go out now and won't be back until late tonight so if I see your message then I will answer it. You will need a USB to MIDI adaptor with 2 MIDI cables to install my programs to the RFX-2000. Regards, Charlie
|
|
|
Post by kendean1942ken on Apr 27, 2010 17:21:48 GMT
Hi charlie, iv got a zoom rfx 2000 and want eftp installed , how do i go on about it regards ken
|
|
|
Post by Charlie Hall on Apr 27, 2010 17:25:43 GMT
Hi Ken, I can supply the files for you to program the RFX-2000 yourself. The price is £40. If you are interested for more information and conditions please email me charliehallATntlworld.com (replacing AT with @). Regards, Charlie
|
|
|
Post by shadfan4 on Apr 30, 2010 11:30:47 GMT
Charlie, your reply saying when directly connected to an RFX 2000 it loses some of the highs. would this problem occur when using mine as I do, only as a "send" effect from my DAW (into the rear line in) and I use the digital SPDIF out from the RFX to route back in.
I mostly use the Magicstomp but as the zoom has what appears true stereo capability then I do use it quite a few times.
Mike.
|
|
|
Post by Charlie Hall on Apr 30, 2010 11:44:26 GMT
Hi Mike, The loss of highs would normally only apply to a guitar connected directly to the RFX inputs because of the lower input impedance. The unit was designed mainly for studio use and studio line level signals and impedances so there should be no problem using it in the way you are doing. Regards, Charlie
|
|