|
|
Q2 eftp
Feb 9, 2023 14:53:26 GMT
via mobile
Post by darrell12345 on Feb 9, 2023 14:53:26 GMT
Hi All,
Just wondering if any one has any ideas what would give my q2 the early sound of the shadows, is there any pedals that would help like the tvs1 which is too expensive there used to be a pb box ,I love to get that sound like the tvs 3 produces.
Darrell
|
|
|
|
Post by Charlie Hall on Feb 9, 2023 17:59:20 GMT
Hi Darrell,
It would be complicated. It might be possible to get closer by sending a separate signal from the guitar through some kind of soft clipping device, then on to the Q2, then mixing the output of the Q2 with the dry signal. This would basically work like a parallel effects loop, but before the amplifier, not within it. I haven't tried this myself but it would be the basis of what I would do if I were to try it.
A valve preamp with a grounded cathode stage and a high pass filter at around 100Hz bfore all of the above would get even closer.
Regards,
Charlie
|
|
|
|
Q2 eftp
Feb 9, 2023 19:19:53 GMT
via mobile
Post by darrell12345 on Feb 9, 2023 19:19:53 GMT
Hi Charlie,
Thanks for the information I will try that.
Best wishes
Darrell
|
|
|
|
Post by Charlie Hall on Feb 9, 2023 20:22:30 GMT
I forgot to mention that you should turn off the Q2 direct signal in the GLOBAL settings when using a oarellel effects loop.
Regards,
Charlie
|
|
|
|
Q2 eftp
Feb 9, 2023 20:53:15 GMT
via mobile
Post by darrell12345 on Feb 9, 2023 20:53:15 GMT
OK thanks Charlie
Regards,
Darrell
|
|
|
|
Q2 eftp
Feb 10, 2023 10:00:25 GMT
via mobile
Post by darrell12345 on Feb 10, 2023 10:00:25 GMT
Any suggestions to a good pre amp pedal Charlie.
Regards,
Darrell
|
|
|
|
Post by Charlie Hall on Feb 10, 2023 15:56:37 GMT
Hi Darrell,
I am out of touch with what is around now. You want to find something that can emulate an ECC83 valve.
Regards,
Chalie
|
|
|
|
Q2 eftp
Feb 10, 2023 16:27:13 GMT
via mobile
Post by darrell12345 on Feb 10, 2023 16:27:13 GMT
OK Charlie,
Thank you
|
|
