|
|
Post by jetblack69 on Apr 17, 2023 18:29:28 GMT
Hi all,
about to buy a set of CS54'S from the Fender website. Been on one or two forums and some of the guys are saying there is no way to tell which pick-up belongs where....does anyone know if impedance is the same on all 3?
Steph.
|
|
|
|
Post by gusstrat on Apr 17, 2023 21:36:37 GMT
Hi Steph,
About six years ago I had the same fitted to my strat, not quite sure about markings but you might find different length wiring which will determine what pickup goes where. Hope this might help.
Regards, Garry.
|
|
|
|
Post by barryg on Apr 17, 2023 21:38:30 GMT
These CS54 pickups on the GAK website state the following.
Custom '54 Bridge Pickup: DC Resistance 6.5K, Inductance 2.75 Henries
Custom '54 Neck / Middle Pickups: DC Resistance 5.9K, Inductance 2.4 Henries
On most pickup sets the leads are of different lengths indicating each pickup position on the guitar.
Barry
|
|
|
|
Post by jetblack69 on Apr 17, 2023 21:48:33 GMT
Cheers Barry, forgot about the "obvious"... length of wire. I can put them on the multimeter as well.
Thanks for the info.
Steph
|
|
|
|
Post by roadworn on Apr 18, 2023 8:29:54 GMT
The bridge pup has a red dot on my set. Ken
|
|
|
|
Post by jetblack69 on Apr 18, 2023 13:48:54 GMT
Hi Steph, About six years ago I had the same fitted to my strat, not quite sure about markings but you might find different length wiring which will determine what pickup goes where. Hope this might help. Regards, Garry. Thanks Gary. |
|
|
|
Post by jetblack69 on Apr 18, 2023 13:50:15 GMT
The bridge pup has a red dot on my set. Ken Yeah this was also mentioned on one of the forums, thanks Ken. |
|
