|
MY Q2
Dec 13, 2009 21:21:06 GMT
Post by colin on Dec 13, 2009 21:21:06 GMT
Hi Charlie, I have this irritating problem with my Q2..not every time, but giving me concern. Let me explain , when I turn on my amp and then switch on my Q2..there is a loud screetching noise, and the LEDs on the channel meter ,shoots up into the red..stays there until I turn it off, and on, a couple of times. Any ideas Cheers Colin
|
|
|
MY Q2
Dec 14, 2009 0:48:59 GMT
Post by Charlie Hall on Dec 14, 2009 0:48:59 GMT
Hi Colin, It might be because of a bad connection from the input and output level control board to the main board. I have had a number of these with this problem, and almost every time, I find it difficult to reproduce the problem because of movement in shipping. What I often do is to clean the connectors and that usually sorts it out. Try gently banging the unit flat down on its base onto a soft surface like a carpet to see if that clears the noise. Regards, Charlie
|
|