|
|
Post by ashby on Feb 19, 2011 9:53:46 GMT
first great site. i remember writing a feature at school on the shadows in 1964. who would have thoughtthe love of their music would have lasted this long.
are the shadows patches available for the pod x3 live?
|
|
|
|
Post by st on Feb 19, 2011 10:54:16 GMT
|
|
|
|
Post by ashby on Feb 19, 2011 11:37:32 GMT
thanks for that i'll just have to work them out formyself!!!
|
|
|
|
Post by JohnG on Feb 20, 2011 12:46:59 GMT
Hi ashby.
If you look in the Line 6 site there is a section where people
post their Pod song/Artist patches....
Cheers....
JohnG....
|
|
|
|
Post by DaveC on Feb 20, 2011 16:52:09 GMT
Hi Ashby,
It looks like you've arrived at the same place as me. Charlie doesn't provide files for the Pod X3 Live and you'll find that there aren't any user patches on the Line6 site.
So far I've created a bank of four amp models. I call it the Hank Bank (OK I'll get my coat ... !), which comprises:
1. Early Hank --- using the 1960 Class A-15 for Move It, Apache etc.,
2. Mid Hank --- using the Class A-30 Fawn,
3. Later Hank --- using the Class A-30 Top Boost,
4. Ultimate Hank --- using the 1993 Matchless D-30.
I'm still experimenting with the various tone and cut settings.
In each case I've set up an effects loop (pre rather than post) that feeds a MagicStomp with Charlie's EFTP, for the echoes.
The output from Pod goes to a Hi-Fi amp, PA mixing desk or an acoustic guitar amp. Currently I'm using a Marshall AS100 with all the tone controls set flat, low gain and a tiny bit of room reverb.
Dave C.
|
|
|
|
Post by JohnG on Feb 20, 2011 17:45:16 GMT
|
|
|
|
Post by DaveC on Feb 20, 2011 18:56:59 GMT
Hi John,
There are some Hank settings provided for the XT models but unfortunately none for the X3s. Also the Echo models are good but limited so you still need that external effects loop (which is available on the X3 Live floorboard but not the X3 kidney bean).
Dave C.
|
|
