|
Post by stratdeluxe on Jun 20, 2009 13:23:29 GMT
Hi Charlie and anyone who might be able to help... I've just loaded Charlie's EFTP '09 programme into my Q2 and when trying it out I found that whenever I choose pgr. 0-19 "foot tapper", the unit almost immediately feeds back and clips, even whithout anything connected. I've tried a hard reset and then reloading the programme, but this doesn't seem to solve the problem. Has anyone had a similar experience? Regards Jesper
|
|
|
Post by Charlie Hall on Jun 20, 2009 15:48:25 GMT
Hi Jesper, The program tested OK at the time I wrote it. I will test it again and let you know later. Regards, Charlie
|
|
|
Post by olemuso on Jun 20, 2009 17:08:50 GMT
Maybe the program has become corrupt. Ask Charlie for a new download and try that.
|
|
|
Post by Charlie Hall on Jun 20, 2009 19:55:15 GMT
Hi Jesper, I have sent the file again to you by email. Please try it and let me know if it is OK. The file size should be 60486 bytes. Regards, Charlie
|
|
|
Post by stratdeluxe on Jun 22, 2009 18:15:40 GMT
Hi Charlie,
Thank you for your quick reply (as always). I've recieved your file again and after loading it, everything works just fine. Sound got much better too. Really nice programmes.
Regards, Jesper
|
|
|
Post by Charlie Hall on Jun 22, 2009 19:40:27 GMT
Hi Jesper, Thanks for confirming that the file sent has cured the problem. Something must have corrupted the original between me sending it and you receiving it. Regards, Charlie
|
|
|
Post by olemuso on Jun 22, 2009 21:58:48 GMT
I love it when a plan comes together
|
|
|
Post by Charlie Hall on Jun 22, 2009 22:51:13 GMT
Hi Ian, Yes, and I don't know why I didn't think of it first. Regards, Charlie
|
|