|
Post by foxy on Jul 3, 2009 10:23:38 GMT
Hi Charlie, today I have loaded the EFTP patches you sent me and I am really pleased. Loaded them with no problem and "OH" what a sound. I am using a Squire 50's classic vibe strat in to the MS and a Vox valvetronic AD15VT I have still got to play with my amp settings but straight away it sounds really good. I still have all my acoustic patches so this is a really good combination if you play an acoustic guitar as well. Will now get on and build my "cutting edge" could you please explain why you recomend shorting out the input when it is not in use. Cheers Paul ;D
|
|
|
Post by Charlie Hall on Jul 3, 2009 14:04:42 GMT
Hi Paul, Thanks for reporting on the Magicstomp sounds. I am pleased that you are happy with it. I only recommend shorting the input because it would stop noise and interference if connected to a switched on amp if nothing was plugged into the input. It is just good design practise. Regards, Charlie
|
|
|
Post by rogercook on Jul 3, 2009 18:44:11 GMT
Hi Paul and Charlie
I have the EFTP patches loaded on my acoustic Magicstomp. The rotary controls remain active with these patches and I'm not sure if this is meant to be the case. Not a problem as I quite like the control this gives
Roger
|
|
|
Post by Charlie Hall on Jul 3, 2009 20:08:47 GMT
Hi Roger, It is correct for the 3 control knobs to work with my echo patches. One control is for direct level, another for echo level, and the 3rd for feedback. Regards, Charlie
|
|