|
Post by leslie on Sept 15, 2023 12:45:34 GMT
Hi to you all i have just purchased a Midi buddy pedal can anyone tell me how to get my Alesis 2 to recognise the pedal i have seen this pedal working and the leads are okay but person i purchased it from could not help me so i would be glad of any help .My Email is helencroweATbtinternet.com changing AT with @
Les Robinson
|
|
|
Post by Charlie Hall on Sept 15, 2023 17:06:37 GMT
Hi Les, Set the MIDI channel on the Alesis to OMNI. Regards, Charlie
|
|
|
Post by leslie on Sept 15, 2023 19:25:05 GMT
Hi Charlie i pressed the midi button then turned the wheel until the OMNI cam up then i pressed the programme button and the Alesis still wont recognise the pedal so i will have to keep changing programmes manually but thank you for contacting me .
Les
|
|
|
Post by sheendigs on Sept 15, 2023 21:27:56 GMT
Hi Les This is something I had written previously: I guess you have also a Wall transformer that came with it.. The input midi from the Q2 is linked through a midi cable to the 'MIDI OUT' of the Midibuddy. Please, slide all the dip switches to the 'upward' position. (It means channel 16 is selected) Then you should be in business..If you want to select patches 00-09, the bank pedal - the first one on the bottom row, that has got a downward arrow and the number ten should be down. When you press any button, it should also show on the display window. If you want to go to higher presets..let's say patch #10-19, then you have to press the bank pedal - the first one on the bottom row, that has an upward arrow and the number ten and then button that says 0,or 2, up to 9.. This is the way the upward bank pedal works..any successive pressure will make it jump by 10 increments..10-20-30--up to 120. Obviously, if you want to go down..use the downward bank pedal. The volume pedal cannot be linked to this midi pedal, you link your volume pedal from your guitar to your amplifier. Here is the manual for the midibuddy! www.rolls.com/doc/manuals/manual_MP128.pdfSheendigs
|
|
|
Post by leslie on Sept 15, 2023 23:28:33 GMT
Thank you mate i will save the info .
Les
|
|