|
Post by GAJ52 on Jan 14, 2010 22:56:47 GMT
Hi Charlie
I normally play via my Q2 then a Tonelab LE to a mixer/monitor speakers or computer. I would like to keep the Vox AC15 / 30 tone of the Tonelab but play through my EFTP Acetone amp. Do I just put all the Acetone tone knobs to the 12 o/c position to neutralize the sound so all I get is the amplification.
Glen
|
|
|
Post by Charlie Hall on Jan 14, 2010 23:54:47 GMT
Hi Glen, No, the best neutral setting for channel B would be with the bass at around 10 or 11 o' clock and the treble somewhere below halfway too, and with the bright switch off. For channel A I think similar settings would be somewhere near right, with the middle control set around 12 o@ clock. Regards, Charlie
|
|
|
Post by GAJ52 on Jan 15, 2010 14:55:09 GMT
Thanks for the info Charlie Glen
|
|