Post by Kevin on Oct 29, 2008 11:31:29 GMT
From: MSN Nicknamedionne171 (Original Message) Sent: 02/03/2008 08:33
whats the correct way to set up ,
guitar, guitar wireless,effects pedal,mixer and amp,
i have not got a clue on this , but iam looking to expand my gear for home use like recording etc
First Previous 2 of 2 Next Last Delete Replies
Reply
Recommend Delete Message 2 of 2 in Discussion
From: Charlie Hall Sent: 02/03/2008 20:50
With a wireless system, usually the guitar with transmitter, then the receiver to effects to amp. Mics and mixers etc. are added to that.
If your amp has a direct out, you can send the direct out to a mixer, then from there to a recorder or playback system.
It may be possible to unplug the amp's main speaker if your amp is all solid state but you must not do this with a valve amp ie. one having output valves for generating the amp's power.
Regards,
Charlie
whats the correct way to set up ,
guitar, guitar wireless,effects pedal,mixer and amp,
i have not got a clue on this , but iam looking to expand my gear for home use like recording etc
First Previous 2 of 2 Next Last Delete Replies
Reply
Recommend Delete Message 2 of 2 in Discussion
From: Charlie Hall Sent: 02/03/2008 20:50
With a wireless system, usually the guitar with transmitter, then the receiver to effects to amp. Mics and mixers etc. are added to that.
If your amp has a direct out, you can send the direct out to a mixer, then from there to a recorder or playback system.
It may be possible to unplug the amp's main speaker if your amp is all solid state but you must not do this with a valve amp ie. one having output valves for generating the amp's power.
Regards,
Charlie